Reasons for considering installation of
When managing an urban construction site, the surrounding environment is as important as the process itself. On days when the wind blows and vehicles come and go frequently, the condition of fugitive dust needs to be checked more frequently, and there is not enough time for the person in charge to travel to the same location every time with portable equipment to measure it.
What we wanted in our field was not complex equipment, but a configuration that could consistently record the current status and quickly recognize any changes. While comparing several products, I decided to review Ace Development's integrated environmental sensor that can view PM2.5, PM10, temperature, and humidity together.
We decided on items tailored to the site first.
The first thing we decided upon during consultation was ‘what to measure.’ Due to the close proximity to nearby residences and roads, we prioritized checking for fine dust and also looked at changes in temperature and humidity. Rather than showing a lot of numbers on the screen, the process of selecting items that were connected to actual field actions was more important. It was also confirmed that the fine dust sensor of
Ace Development Environmental Integrated Sensor has obtained Ministry of Environment Performance Certification Grade 1 No. 2025-p-2. It was easy to understand what standard to use the data as I was even informed that measurement values other than certification items were for reference only. What changed after installing
The biggest change was the verification method. Previously, you had to go around the site to check instantaneous values and make separate notes, but after installation, you could look at changes over time based on data accumulated at a certain location. It was also easy to compare how the numbers changed during morning vehicle arrival times and dry afternoons.If the
level was seen to be higher than usual, the order of response was determined by checking the water supply status and inspecting the vehicle movement section. Ace Development's integrated environment sensor does not replace field work, but it is practical in that it provides a basis for the person in charge to determine where to start checking.
Why mobile verification is convenient
Field managers aren't in the office all day. Being able to check data even during meetings or patrols is helpful for actual management. By linking integrated monitoring, you can check the current values and graphs on the PC web and Android app SENSO-LINK, allowing you to check for changes without having to go to the equipment.
Especially when looking at trends throughout the day, it was easy to distinguish between momentary high values and sustained changes. Being able to download records and organize internal inspection data was also more convenient than transferring them manually each time.
Things to check before installation
After reviewing it in person, the installation location was as important as the sensor specifications. Because it is difficult to represent the entire site in areas directly exposed to vehicle exhaust gases or too close to sprinkler facilities, the work area and surrounding environment had to be considered together. It would be better to check the power, LTE reception status, and equipment inspection route in advance.
If you need a permanent fine dust meter and data recording in an urban site, Ace Development's environmental integrated sensor was an option worth considering. However, when receiving a quote, it is easy to estimate the actual operating cost by checking not only the sensor body but also the scope of communication, monitoring, installation, and maintenance.
Frequently Asked Questions
Q. Will the fine dust problem be automatically solved if installed??
A. A sensor is a device that measures the status and helps determine when to respond. On-site measures such as watering, cleaning, and vehicle movement management must be carried out separately.
Q. How did you use the records?
A. This is a flow that compares changes by time zone and work schedule together and uses it as reference material to check sections where the number repeatedly increases.
Q. Is any installation location okay?
A. No. It must be determined by comprehensively considering the measurement purpose, work flow, local pollution sources, and power and communication conditions.
Contents focused on in this article
The process of checking fugitive dust data and inspecting water spray and vehicle movement routes by city construction site managers was analyzed in a later version.
Source: Ace Development , Ace Development Blog , Ace Development Naver Blog , Web Support Center Blog , Web Support Center Naver Blog
#Ace Development #Environmental Integrated Sensor #Environmental Integrated Sensor Review #Construction Site Fine Dust #Fugitive Dust Measurement #Fine Dust Sensor #On-site Environmental Management #IoT Monitoring #PM10 #PM25
With the help of Bucheon Web Support Center , we created homepage and blog content at a reasonable cost considering AEO, GEO, and SEO.
